2016--2019 Chevrolet Cruze / Cruze Hatch - 1.4L Turbo Elite

TRIFECTA is pleased to announce the Generation II Chevrolet Cruze MY2016--2018+ vehicle software recalibration (reflash) for vehicles utilizing the 1.4L turbo (LE2) engine with either the 6 speed automatic transmission (6T35 / RPO:MNU) or 6 speed manual transmission (M32-6/ RPO: MF3). Specific gains over factory calibration are up to (uncorrected) 97lb-ft of torque and 59 horsepower, with peak gains showing at up to 74lb-ft of torque and 51 horsepower, with no vehicle modifications beyond the calibration.
The TRIFECTA Powertrain Calibration for the Generation II MY2016--2018+ Chevrolet Cruze includes a TRIFECTA flash loader.
Specifications of the TRIFECTA Performance Generation II MY2016--2018+ Chevrolet Cruze 1.4L turbo LE2 ECM software reprogramming:
-gains of up to +97 ft-lbs and +59 WHP under the curve (and +74 ft-lbs and +51 WHP peak) on 92 octane
-Powertrain calibration has been tested and validated for various environments, such as cold/heat, elevation, and variations in fuel quality
-Power feels linear and immediately responsive (improved drivability and throttle attentiveness)
-Retains all GM OE diagnostics and ECM functionality
-Retains all OE error code reporting and functionality
-Emissions readiness checks are present; emissions compliant
-Maintains functionality of ABS and TC systems
-Knock detection mechanisms and OE engine knock detection sensitivity is retained
-The TRIFECTA flash loader and Transparency featureset does not increment the ECM write counter or increment entries in the flash history
-Return to stock functionality included with flash loader
Specifications of the TRIFECTA Performance Generation II MY2016--2018+ Chevrolet Cruze 6T35 (Gen 3) 6-Speed automatic transmission TCM calibration software reprogramming:
-Supplementary 6T35 Gen 3 (autostop capable) transmission TCM reprogramming compliments the ECM reprogramming and completes the TRIFECTA Powertrain Calibration: designed to work in unison with the ECM reprogramming for optimized performance
-Improved shift times in adverse shift patterns
-Improved shift logic (improved drivability)
-Does not shorten transmission life or increase cooling requirements
-Retains all OE diagnostics and TCM functionality
-Retains all OE error code reporting and functionality
-Improved fuel economy with improvements made to torque converter slip profiles
-Retains all factory drive modes: Drive, “L quadrant”
Supplementary Featureset of the TRIFECTA Performance Generation II MY2016--2018+ Chevrolet Cruze powertrain calibration software reprogramming:
-TRIFECTA PASM (Performance Auto Stop Mode):
When the cruise control subsystem is armed (via the steering wheel button), auto-stop works normally, just as it did from the factory. When the cruise control subsystem is disarmed, auto-stop events are re-calibrated with sport and performance strictly in mind (available only with vehicles equipped with cruise control from the factory).
Furthermore, the feature can be enabled and disabled at any time. For example:
If the vehicle is auto-stopped, switching the cruise control subsystem off causes the engine to restart immediately.
If the engine is running because no auto-stop event could occur due to the cruise control system being disabled, enabling it will cause the engine to stop immediately, provided all of the other auto-stop criteria above is met as well.
-TRIFECTA DSVM (Driver Selectable Vehicle Modes):
Modify driving profiles based on the cruise control enable setting (vehicles equipped with cruise control only)
Cruise Control ON (armed) = Vehicle responds to pedal input and shift logic similar to factory programming
Cruise Control OFF (disarmed / TRIFECTA mode) = Vehicle responds more aggressively to throttle input, shifts are optimized for performance*
* - Fuel economy observed in TRIFECTA mode was observed to be similar to original factory fuel economy figures assuming “regular” driving style is adhered to
-TRIFECTA Advanced Zoned Knock Control Algorithm:
Customized operating system enhancements allow for zoning of knock adaptation factors to provide superior dynamic knock detection and control. Allows for operation with improved power profiles under factory-specified minimum fuel requirements (“87 octane” – see owner's manual for full details) as well as fully optimized power with higher octane fuels.
Installation Notes:
-Estimated installation time of ~20 minutes
-Premium fuel is recommended for maximum power output, but not required
1.4L turbo LE2 dyno (on 92 octane pump gas) (this vehicle is a 2016--2018+ Chevrolet Cruze with the 1.4L turbo LE2 engine) - stock wheels/tires

Additional information and availability:
- This powertrain calibration includes a TRIFECTA powertrain calibration file specific to your vehicle and includes a flash loader device
-Advertised gains are quoted as 'up to' and may be less for a vehicle operated at altitudes higher than near sea level.
The TRIFECTA Elite Calibration offers premium tier-1 support. With this product, customers can request specific calibration changes and support for third party hardware. Remote-tuning services are offered with this tier.
- Custom features such as DSVM and PASM may not be available on non-US market vehicles. Please inquire with us prior to purchase if you have an export model or other non-US specification Cruze.
Automotive Press:
Autoguide - TRIFECTA Performance Gives us a Reason to Want a Chevrolet Cruze